Ruby PSES 5408

PoE allows power to be supplied to end devices, such as Wireless Access Points or VoIP Phones, directly through the existing LAN cables. By supplying the power end-span, you can centralize power distribution and backup without the need to increase infrastructure.

Key Features

n Conforms to IEEE 802.3 10BASE-T, IEEE802.3u 100BASE-TX and IEEE 802.3x flow control standards
n Supports 10/100Mbps auto-detect half/full duplex
n Supports TP interface auto MDI/MDI-X function for auto TX/RX swap
n Supports 802.3x flow control pause packet for full duplex
n LEDs to indicate: Link/Act, Speed, Power Status and PoE activity
n FANLESS
n RoHS Compliance

PoE Features
n Supports IEEE 802.3af compliant
n Supports Power over Ethernet (PSE) on each PoE-TP port (End-Point)
n Full power(15.4w) support for per PoE-TP port
n Auto detect powered device and consumption levels
n Smart feature for PD on/off, PD detection, power level, PD status and power feeding priority(X)
n Automatic Fault Detection(Over/Under Voltage & Current)
n Thermal shutdown protection(Tj > 150℃)
n LED indicators for and POE activity
Technical Specification

Model
PSES-5408
Description
8-Port Unmanaged 10/100 Fast Ethernet Switch with 4 PoE Ports
Standards
IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX
Media
10BASE-T: UTP Cat. 3, 4, 5 or up
100BASE-TX: UTP Cat. 5 or up
No. of Port
8*10/100 Mbps RJ-45 ports with 4 PoE ports
Auto MDI/MDI-X
Yes
Transmission Mode
10/100Mbps, full/half-duplex (Auto-sensing)
Transfer Rate
10Mbps: 14880pps (64 Bytes Package)
100Mbps: 148800pps (64 Bytes Package)
Flow Control
IEEE 802.3x flow control for full-duplex
Back pressure in half-duplex operation mode
Switching Method
Store & forward
LEDs
Power, Link/Act,Speed, PoE activity
Ambient Temperature
0° to 40°C
Humidity
5% to 90%
Voltage
AC 90-240V
Frequency
50-60Hz
Power Consumption
65W
Physical Dimension
220(W)x44(H)x130.5(D)mm
Weight
1kg
Safety
Comply with FCC Part 15 Class A & CE Mark Approval

Aftur í vörur Panta vöru

a